ITG: gearless machines for elevator, homelift, freight elevator and lift components
LIFT COMPONENTS
ITG lift components
Italian Top Gears has created a range of high quality lift components: discover them.
You will find innovation and attention to details also in this case, as for our tradition
ITG geared machines
All ITG geared machines, whatever their application, ensure the highest level of safety and reliability. They have been designed to last a long time and are tested, one by one, with complete and advanced control instruments that allow to verify the efficiency of each single phase of the electric motor in addition to the average one, the speed of rotation of the motor, its electrical absorption, the efficiency of the motor and the overall efficiency of the machine, the control of the correct operation of the brake and its current absorption and sound level.
Each ITG geared elevator machine leaves the assembly line only if the vibration level does not exceed 0.6mm / second square. To better understand this value, we invite you to check the vibration level of other machines.
Finally, each geared ITG machine leaves the assembly line with the brake perfectly adjusted and the adjustment position marked.
ITG lift components
Browse in order to discover the ITG lift components. Press the buttons
ITG
LIMVE
ITG
DIVERTORS
ITG
GUIDE SHOES
ITG
ROPE
ATTACHMENTS
ITG
MISCELLANY
Quick reactions as thoughts: ITG LIMVE overspeed governors
The ITG LIMVE Series are centrifugal monodirectional and bidirectional overspeed governors designed for activating the safety gears by means of two connected masses that, driven by the centrifugal force, engage the intervention device once the tripping speed is reached.
The ITG LIMVE overspeed governor is available with pulleys having the diameter of 200, 240 and 300 mm, and for rated speed so low as 0,15 m/s and tripping speed up to 2 m/s.
The ITG LIMVE overspeed governor tension weights can be of 10 or 20 kgs.
The ITG LIMVE overspeed governors can be equipped with remote test, remote reset and anticreeping devices.
The LIMVE overspeed governor and the tension weight devices can be supplied separately by using specific part numbers.
EN81-20 & 50 certified
When reaction time is really essential
The intervention system of the elevator overspeed governor ITG LIMVE operates with two distinct lobes and relating anchorage points expanding with the rise of the centrifugal force, and thus reaching the intervention block connected to the electric switch. The two attachment points allow to fully meet the reduced tripping time imposed by the EN.81: 2014 20 & 50 standard.
Italian quality throughout
The electrical components used in the overspeed governor for elevator ITG LIMVE come from one of the largest and most successful Italian manufacturers, making the product truly "Made in Italy"
An "Industry 4.0" example
The certified over-speed governor for elevator calibration system used for the ITG LIMVE is fully electronical and provides a report for each manufactured and calibrated unit. It’s an example of the "Industry 4.0" concept, since the data of each over-speed governor is stored in the Company information system and includes the order number, the Customer, the serial number of the over-speed governor, the diameter of its pulley, as well as the nominal and tripping speed
Welcome to ITG. We provide Reliable and Safe design.
CONTINUE THE TOUR
ITG diverting pulleys
ITG supplies a range of standard divertors for elevator having the diameters 400, 450 and 500 mm.
Divertor and return pulleys with different diameters and diverse characteristics are available upon request.
Castings are made of G 25 cast iron.
The ITG divertors are supplied complete of shaft and external supports.
The ITG divertors for elevator are fitted with high quality bearings of oversized dimension.
The the lenght of the shaft of the divertors for elevator can be made according to installation needs
DOWNLOAD THE BROCHURE
ITG COMPONENTS
Welcome to ITG. We provide Reliable and Safe design.
CONTINUE THE TOUR
GUFML09ST Supporto pattino orientabile, in acciaio, per guide da 5 a16 mm - GUFML09ST Swiveling guide shoe support in steel for 5 up to 16 mm guide rails
Carico 1000 N - Load 1000 N
OPZIONI - OPTIONS
Oliatore codice - Oiler part number: OLIAL05/OLIAL09
GUFMLO55T Supporto pattino fisso, in acciaio, per guide da 5 a 6 mm. - GUFMLO55T Fixed guide shoe support in steel for 5 up to 6 mm guide rails.
Carico 1000 N - Load 1000 N
OPZIONI - OPTIONS
Oliatore codice - Oiler part number: OLIAL05/OLIAL09
GUGHL09ST Supporto pattino orientabile, in ghisa, per guide da 5 a10 mm - GUGHL09ST Swiveling guide shoe support in cast iron for 5 up to 10 mm guide rails
Guide shoe
5 mm CUPLAL05ITG3
6 mm CUPLAL06ITG3
7 mm CUPLAL07ITG3
8 mm CUPLAL08ITG3
9 mm CUPLAL09ITG3
10 mm CUPLAL10ITG3
15,8 mm CUPLAL15ITG3
16 mm CUPLAL16ITG3
Welcome to ITG. We provide Reliable and Safe design.
CONTINUE THE TOUR
The ITG rope attachments are available in various lengths for ropes from 5 to 16 mm and can be without spring, with spring steel or polyurethane spring.
Certified according to EN.81:2014 20
DOWNLOAD THE BROCHURE ITG COMPONENTS
Welcome to ITG. We provide Reliable and Safe design.
CONTINUE THE TOUR
PHOTOCELLS
Codice: FOTOV24R10NW Kit fotocellula K 1111 senza connessioni precablate, singolo raggio infrarosso
portata 10 m. , completa di manuale di istruzione multilingue compreso arabo
Part number: FOTOV24R10NW Photocell kit K 1111 without pre-wired connectors, 10 mts single
infrared ray, complete with multilingual instructions manual including English and Arabic
Codice: FOTOV24R110WW Kit fotocellula K 1111 con connessioni precablate, singolo raggio infrarosso
portata 10 m. , completa di manuale di istruzione multilingue compreso arabo
Part number: FOTOV24R110WW Photocell kit K 1111 with pre-wired connectors, 10 mts single
infrared ray, complete with multilingual instructions manual including English and Arabic
OILERS
Oliatore per pattino guida codice OLIAL05
Oiler for guide shoe part number OLIAL05
Oliatore per pattino guida codice OLIAL09
Oiler for guide shoe part number OLIAL09
RUBBER DAMPERS
Codice: TAAL060X080 tampone antivibrante per cabina - bullone M 8 - durezza Shore A 55
Part number: TAAL060X080 anti vibrating rubber damper for cabin- M8 bolt - hardness Shore A 55
Codice: BAMGO1V tampone antivibrante per telaio macchina - bullone M 8 - durezza Shore A 55
Part number: BAMGO1V anti vibrating rubber damper for bedplate - M8 bolt - hardness Shore A 55
Codice: PACABS12 tampone antivibrante per meccanica - bullone M 8 - durezza Shore A 55
Part number: PACABS12 anti vibrating rubber damper for mechanical parts- M8 bolt - hardness Shore A 55
ROPE CLAMPS
GUIDE RAIL CLIPS
